
At a recycling plant, a waste manager or a scrap yard, weight alone is not enough. Every waste that comes in or goes out has to be identified with its code from the European List of Waste, the LER code. That code appears in the treatment contract, in the shipment identification document and in the waste manager's records, so the delivery note should carry it from the start, and it should be the correct one. This article explains how to read an LER code, how to choose it and which mistakes keep coming up.
What the regulation says
Ley 7/2022, de 8 de abril, de residuos y suelos contaminados para una economía circular (Spain's Waste and Contaminated Soils Act for a circular economy), establishes in Article 6 that waste is identified and classified according to the European List of Waste approved by Decision 2014/955/EU, which amended Decision 2000/532/EC. If a waste is listed as hazardous, that classification is mandatory.
The same act, in Article 20, requires the original producer or holder to identify their waste in accordance with Article 6 before handing it over for management, and to give that information to whoever will manage it. In other words, the code is determined first of all by whoever hands over the waste, but the manager receiving it has to check that it matches what actually arrives.
In addition, Real Decreto 553/2020, de 2 de junio (Spain's Royal Decree on the shipment of waste within the country), includes the LER code among the details of the treatment contract (Article 5) and of the identification document that accompanies the waste (Annexes I and III).
How to read an LER code
Each code has six digits, written as three pairs:
- The first two indicate the chapter, which usually corresponds to the activity or process that generates the waste. For example, chapter 17 covers construction and demolition waste, and chapter 19 covers waste from waste treatment facilities.
- The next two indicate the sub-chapter within that chapter. For example, 17 04 is metals from construction and demolition.
- The last two identify the specific waste. For example, 17 04 05 is iron and steel.
Codes marked with an asterisk correspond to hazardous waste. Some wastes have two possible entries, one hazardous and one not (so-called mirror entries): in those cases you need to know whether the waste contains hazardous substances in order to choose one or the other.
How to choose the right code, step by step
The list itself sets out a search order. In short:
- Search by the source that generates the waste in chapters 01 to 12 and 17 to 20. Waste from a building site goes under 17; waste coming off your own sorting line goes under 19; waste of municipal origin goes under 20.
- If it doesn't fit, look at chapters 13, 14 and 15 (oils, solvents, packaging).
- If it still doesn't fit, try chapter 16, which covers wastes not otherwise specified in other chapters.
- Only as a last resort, use a code ending in 99 ("wastes not otherwise specified") from the chapter that matches the activity.
- Check whether it is a mirror entry and, if so, whether the waste has hazardous properties.
An important point for waste managers: the same material can carry a different code on the way in and on the way out. Scrap arriving from a building site may come in as 17 04 05, and the ferrous metals leaving your treatment line for another facility may go out as 19 12 02. The code describes the origin of the waste, not just the material.
Common examples at loading sites
| Situation | Indicative code | What to check |
|---|---|---|
| Iron and steel from construction | 17 04 05 | That it is not mixed with other waste |
| Copper, bronze or brass from construction | 17 04 01 | Separated by metal |
| Aluminium from construction | 17 04 02 | Separated by metal |
| Ferrous metals from your treatment line | 19 12 02 | That they come from mechanical treatment |
| Metals from municipal collection | 20 01 40 | Municipal origin |
| Mixed non-hazardous construction rubble | 17 09 04 | Mirror entry: rule out hazardous substances |
| Non-hazardous soil and stones | 17 05 04 | Mirror entry: rule out contamination |
These are indicative examples: the correct code depends on the real origin of the waste and its composition, and if in doubt you should consult the full list or your regional authority (comunidad autónoma).
Common mistakes on the delivery note
- Always using the same code for convenience. If the software has a default code for everything, it will end up on delivery notes where it doesn't belong.
- Overusing 99 codes. They are the last option, not a catch-all.
- Ignoring mirror entries. Choosing the non-hazardous entry without having ruled out hazardousness is a risk for the manager who accepts the waste.
- Not matching the treatment contract. If the delivery note says one code and the contract another, one of them is wrong.
- Typing the code by hand. One changed digit turns one waste into a different one. It is better to pick it from a list linked to the item or the customer.
- Forgetting the NIMA and the treatment operation. The LER code says what the waste is; the NIMA (Spain's environmental identification number) identifies the site, and the treatment operation says what is done with it. The three details go together.
The LER code on the CargoGest delivery note
For waste managers and recycling plants, CargoGest stores the LER code, the NIMA and the treatment operation on each delivery note, alongside the weight that comes straight from the weighbridge. Inbound and outbound loads are weighed, with double weighing when needed, and suppliers' inbound delivery notes go through the weighbridge just like outbound ones.
You can see how a plant works with the software on the page for CargoGest for recycling, waste and scrap, and how the weight reaches the delivery note on the weighbridge software page.


